0

#38 Bernina Piping Foot

£37.50

The Bernina Piping foot is ideal for creating narrow-to-medium piping, as well as for sewing unevenly thick fabric layers.

GTIN: 030 915 71 00 SKU: 030 915 71 00 Category: Tag:

The Bernina Piping foot # 38 is often also termed the uneven foot, owing to the different thicknesses of the two halves of its sole. Consequently, this foot is ideal for creating narrow-to-medium piping, as well as for sewing unevenly thick fabric layers.

The right side of Piping foot # 38 is higher than the left side, allowing it to ride easily over the fabric layers as you sew. In addition to piping, this foot is also suitable for sewing on thick tape and ribbon, cords, or hook-and-loop tape.

TIP: when sewing on tape, the tape should lie under the right side of the foot flush with the edge of the thicker left side. This will allow the needle to catch the edge of the tape more easily.

Brand

Bernina

These feet will fit

This is a type A foot. To check if this foot fits your Bernina see the guide below.

​​​​​​​500 Models : 530, 532, 534 and 540

600 Models : 600, 610, 640 (not Artista 640), 642, 644

700 Models : 700, 707, 708, 709, 717, 718, 719, 730 (not the Artista) 731, 732, 740, 741, 742, 744

800 Models : 800, 801, 802, 803, 807, 808, 809, 810, 811, 817, 818, 819, 830, 831, 832, 840, 841, 842, 850

900 Models : 900, 910, 930, 931, 932, 933, 940, 950

1000 Models : 1000, 1001, 1004, 1005, 1006, 1008, 1008S, 1010, 1011, 1015, 1020,1021,  1030, 1031, 1050, 1070, 1080, 1090, 1091, 1120, 1130, 1230, 1240, 1241, 1260, 1530

© 2024 Bamber Sewing Machines
Powered by woo-creative.co.uk